================
Sensor Selection
================

Selecting the "Sensor..." button on either the 
"TAO: Buoy selection" window or the TAO main window
will display the "TAO: Sensor Selection" window. 
The "TAO: Sensor Selection" window contains sensor
buttons for your selected buoys. If you haven't 
selected any buoys on the "TAO: Buoy selection" 
window, no sensor buttons will be shown on the 
"TAO: Sensor Selection". 

There are 3 ways to select or de-select sensor
buttons:

1. Click on sensor button to select or de-select 
   that sensor

2. Click on a location label (e.g. 5n 110w) to 
   select or de-select all sensors for the buoy 
   at that location

3. Pull down the "Selection Menu" and select a 
   sensor. This selection will be applied to all of
   the buoys you have selected on the "TAO: Buoy
   Selection" window.